Find The Best Low Profile Motorcycle Scissor Jack – Editor's Recommended

If you are looking for the low profile motorcycle scissor jack, then you are in the right place. We have done a thorough analysis of a variety of consumer-rated products, highlighting the benefits and shortcomings of each model. With it, you can have a memorable experience, and it is safe to use.

So, here we’ve picked the best-selling low profile motorcycle scissor jack in the market. We’ll do a detailed review that will guide you to make a well-informed buy and make your every penny count. It is easy to use and can operate quickly. You will find the one that can come with preset features so that there will be hassle-free usage. Check out the list at best low profile motorcycle scissor jack.

10 Best low profile motorcycle scissor jack: Top Picks
# Preview Product
1 Pyle Motorcycle Scissor Jack Lift W/ Dolly - Portable Ez Bike Rack, Front Rear Center Tire Wheel Engine Stand W/ Wheels-Low Profile Manual Flat Floor Hoist Table-PLMOTJC11,Black

Pyle Motorcycle Scissor Jack Lift W/ Dolly - Portable Ez Bike Rack, Front Rear Center Tire Wheel...

2 BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lift Jack with 1500 lb. Capacity, Steel

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lift Jack with 1500 lb. Capacity,...

3 OTC 1545 Ultra Low Profile Motorcycle and ATV Lift with 1,500 lb. Capacity

OTC 1545 Ultra Low Profile Motorcycle and ATV Lift with 1,500 lb. Capacity

4 ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle Dirt Bike Scooter Crank Stand

ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle...

5 Orion Motor Tech Motorcycle Lift, 4-13 Inch Motorcycle Scissor Jack, 1100lb Capacity Wide Deck Motorcycle Center Stand and 1/2 Ton Scissor Lift Jack for Street Bikes Cruisers Touring Motorcycles More

Orion Motor Tech Motorcycle Lift, 4-13 Inch Motorcycle Scissor Jack, 1100lb Capacity Wide Deck...

6 BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lifts, 1500 lb. Capacity, Steel

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lifts, 1500 lb. Capacity, Steel

7 Donext 1200 LB Motorcycle Lift Scissor Jack Wide Deck Hoist Stand Maintenance Bikes ATVs Garage Repair Stands Lift

Donext 1200 LB Motorcycle Lift Scissor Jack Wide Deck Hoist Stand Maintenance Bikes ATVs Garage...

8 TUFFIOM Motorcycle Scissor Lift Jack w/ Rubber Top Surface & Safety Pin, Height Adjustable Steel Center Hoist Crank Stand for Motorcycle Repair Maintenance, 1100LBS Weight Capacity

TUFFIOM Motorcycle Scissor Lift Jack w/ Rubber Top Surface & Safety Pin, Height Adjustable Steel...

9 ZENY 1100 LB Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs Scooter Crank Stand

ZENY 1100 LB Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs Scooter Crank Stand

10 Smartxchoices Motorcycle Lift 1100 LB Capacity Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand for Street Bikes Cruisers Touring Motorcycles ATVs

Smartxchoices Motorcycle Lift 1100 LB Capacity Wide Deck Motorcycle Center Scissor Lift Jack Hoist...

10 Best low profile motorcycle scissor jack On The Market Today

With so many different types of low profile motorcycle scissor jack, we seek to prioritize convenience, effectiveness, and versatility. Below, we dive into the review used to compare and analyze each product, why we believe these factors matter, and highlight the products that excelled in each performance area. Based on our expert recommendations, we have selected our top picks:

  • Quality
  • Price
  • Return Policy
  • Brand
  • Size
  • Weight
  • Convenience
  • Design
  • Functionality
  • Value
  • Easy to Use
  • Warranty
  • Durability
  • Customer Feedback
  • Types
Bestseller No. 1

Pyle Motorcycle Scissor Jack Lift W/ Dolly - Portable Ez Bike Rack, Front Rear Center Tire Wheel Engine Stand W/ Wheels-Low Profile Manual Flat Floor Hoist Table-PLMOTJC11,Black

  • DURABLE CONSTRUCTION: The motorbike service floor rack is made of heavy duty steel sturdy enough to support most motorcycles. It is finished w/ a black powder coat & features 1/4 inch thick rubber mat on the platform to grip & stabilize the bike.
  • DURABLE CONSTRUCTION: The motorbike service floor rack is made of heavy duty steel sturdy enough to support most motorcycles. It is finished w/ a black powder coat & features 1/4 inch thick rubber mat on the platform to grip & stabilize the bike.
  • GREAT MOBILITY: The dolly tray is a great addition to this motorcycle center stand allowing it to be easily transitioned from one place to another, makes the job so much easier! Comes with four steel casters that require minimal assembly.
  • LARGE CAPACITY: This solid & well-built scissor flat jack lift has a wide 9" x 14.6" workstation size offering you a loading capacity of 1100 lbs which can support most of the motorcycles in the market today.
  • USEFUL BIKE TABLE: The Pyle Motorcycle Jack with Dolly is a must-have for cruiser, sport or dirt bike enthusiasts! It is used to lift the bike off the ground for maintenance. Put the stand underneath the bike & use a wrench or air tool to elevate.
SaleBestseller No. 2

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lift Jack with 1500 lb. Capacity, Steel

  • Universal Lift:Bilt Hard ATV lift has a large enough 1,500 lb. lifting capacity and 5-1/2" to 17" lifting range to work for any motorcycle or ATV without having to source a different jack! Similarly you can use the same jack on your chopper, dirt bike, and sport bike without having to worry.
  • Durable and Sturdy: The hydraulic motorcycle jack features industrial quality for professional mechanics, hardcore and home workshop. It is constructed of high strength steel that is durable and long lasting. The powder coated finish also helps to make it rust and corrosion resistant.
  • Safe and Convenient: The included multi-positional safety lock gives you added security when working on your motorcycle. The rubber pads on top of the saddle that provide a slip-free surface and keep your frame from getting scratched. The caster wheels and removable handle also makes your work easier and less effort.
  • Warranty: Meets international quality standards. 1 YEAR WARRANTY, don't hesitate to call us if you have any questions, our support team is on standby for YOU.
  • Easy Operation: Foot-activated hydraulic pump that allows for hands-free lifting and lowering. This makes it very easy to position and stabilize your bike while you use the motorcycle lift jack allowing for precise (and safe!) operation. But please MUST refer to the user manual and video to ensure safe use.
SaleBestseller No. 3

OTC 1545 Ultra Low Profile Motorcycle and ATV Lift with 1,500 lb. Capacity

  • Two-year limited warranty
  • Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use
  • Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier
  • Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches
  • OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road
SaleBestseller No. 4

ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle Dirt Bike Scooter Crank Stand

  • 1,100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation
  • Platform Dimensions: 14.5" x 9",Weight Capacity: 1100 lbs.
  • Solid & Sturdy steel construction with a red paint finish
  • Widen deck (wide 9'') with safe rubber surface to prevent slippage and scratching
  • This motocycle lift repair stand is Designed to fit most motorcycle models,For use in the garage, shop, or at the track
SaleBestseller No. 5

Orion Motor Tech Motorcycle Lift, 4-13 Inch Motorcycle Scissor Jack, 1100lb Capacity Wide Deck Motorcycle Center Stand and 1/2 Ton Scissor Lift Jack for Street Bikes Cruisers Touring Motorcycles More

  • NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.
  • XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
  • REINFORCED LIFT CAPACITY:With a hefty lift capacity of 1100 lb and dynamic lift height range from 3 3/4" to 13 2/5", this motorcycle center jack can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
  • DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
  • NON-SLIP DECK & GLOVES: The motorcycle lift stand's lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
SaleBestseller No. 6

BILT HARD Motorcycle Lift, Heavy Duty Low Profile Hydraulic ATV Lifts, 1500 lb. Capacity, Steel

  • Easy Operation: Foot-activated hydraulic pump that allows for hands-free lifting and lowering. This makes it very easy to position and stabilize your bike while you use the motorcycle lift jack allowing for precise (and safe!) operation. But please MUST refer to the user manual and video to ensure safe use.
  • Warranty: Meets international quality standards. 1 YEAR WARRANTY, don't hesitate to call us if you have any questions, our support team is on standby for YOU.
  • Universal Lift:Bilt Hard ATV lift has a large enough 1,500 lb. lifting capacity and 5-1/2" to 17" lifting range to work for any motorcycle or ATV without having to source a different jack! Similarly you can use the same jack on your chopper, dirt bike, and sport bike without having to worry.
  • Durable and Sturdy: The hydraulic motorcycle jack features industrial quality for professional mechanics, hardcore and home workshop. It is constructed of high strength steel that is durable and long lasting. The powder coated finish also helps to make it rust and corrosion resistant.
  • Safe and Convenient: The included multi-positional safety lock gives you added security when working on your motorcycle. The rubber pads on top of the saddle that provide a slip-free surface and keep your frame from getting scratched. The caster wheels and removable handle also makes your work easier and less effort.
SaleBestseller No. 7

Donext 1200 LB Motorcycle Lift Scissor Jack Wide Deck Hoist Stand Maintenance Bikes ATVs Garage Repair Stands Lift

  • [DURABLE]: Solid steel structure of the motorcycle lift jack comes with a black powder coated finish which is for oil-resistant, grease-resistant and dirt-resistant.
  • [STABLE]: Extra wide platform of 9.06” x 14.57” increases the contact area with the motorcycle. High-quality rubber pad prevents your motorcycle from sliding.
  • [STRONG]: Solid steel construction with a lifting capacity of 1200lb. Heavy-duty materials make it sturdier and more powerful.
  • [EASY TO OPERATE]: Comes with a 7/8" socket and a special crank handle. You can easily lift the motorcycle by rotating the handle.
  • [USEFUL]: Dynamic lift height range from 3 1/2" to 14 3/4", the motorcycle center jack can be used to lift street bikes, cruiser bikes, adventure touring motorcycles, etc.
Bestseller No. 8

TUFFIOM Motorcycle Scissor Lift Jack w/ Rubber Top Surface & Safety Pin, Height Adjustable Steel Center Hoist Crank Stand for Motorcycle Repair Maintenance, 1100LBS Weight Capacity

  • ANTI-SLIP TOP PAD: Anti-slip rubber top surface of the motorcycle lift jack can help it hold motorcycle more stably and also reduce the possibility of scratching your motorcycle.
  • SAFETY PIN FOR EXTRA SECURITY: The motorcycle lift jack is designed with a safety pin which can reduce the possibility of falling down during use and provide extra safety.
  • 1100LBS WEIGHT CAPACITY: With main frame made of steel, the motorcycle lift stand can support up to 1100lbs. And its own weight is about 13kg/28.7lbs.
  • SIMPLE OPERATION: To use the item, just attach the handle to to lift stand and then rotate it to adjust the height to your desired height. ( It is suggested to wear gloves when operation.)
  • ADJUSTABLE HEIGHT: The height of the motorcycle lift jack can be adjusted to meet your specific needs. And its minimum height is about 3.94” and its maximum height is about 14.2”.
SaleBestseller No. 9

ZENY 1100 LB Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs Scooter Crank Stand

  • Fits Cruisers, Choppers, Can Am Spyder, Trikes, Sport Bikes
  • Simple crank operation
  • Two (2) variable screw adapters
  • 12 cm removable crank handle
  • Solid steel construction in a red and black powder coated finish
SaleBestseller No. 10

Smartxchoices Motorcycle Lift 1100 LB Capacity Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand for Street Bikes Cruisers Touring Motorcycles ATVs

  • Minimum Height: 3.25"; Maximum Height: 13.25"
  • Designed to fit most motorcycle models;For use in the garage, shop, or at the track.
  • Rubber mat on the lifting platform for added stability and prevented scratches
  • Dimensions: 14.8 " x 9" x 4.5",Weight Capacity: 1100 lbs.
  • 1100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation

Buying Guide for the Best low profile motorcycle scissor jack

Are you still wondering if these best low profile motorcycle scissor jack are worth buying? Well, we have great news! We just finished reviewing it, concluding that it has to be. It has everything you need to make your life easier in your needs. The best part about it is low profile motorcycle scissor jack at a discounted price! What are you waiting for? This best product might be what you’ve been looking for for so long. However, we must admit that its capacity is as large as some. A few questions you may want to ask before buying:

  • What is the low profile motorcycle scissor jack?
  • How does low profile motorcycle scissor jack work?
  • How to choose the product?

Size and Design

Size is one of the most important considerations you need to see while buying a low profile motorcycle scissor jack. Go for the one that meets all your needs. Always see if it comes in an attractive design and offers maximum flexibility.

Versatility

Always see if it is capable of preparing different types of ingredients. This will give you the option to use it for different purposes. This low profile motorcycle scissor jack must allow you to choose from different settings so that there will be perfect consistency.

Weight

The first thing you need to consider is the weight of the low profile motorcycle scissor jack. A lightweight user may not be comfortable with the weight if it is too heavy. It will be difficult to use while you are working. Moreover, if the weight is high, it will make you tired. Heavier low profile motorcycle scissor jack is less manoeuvrable but much more powerful. So, it all depends on your level of expertise. If you can handle a heavy-weight product, go for it.

Material

The product should have a durable construction. Look for a product which is made of quality material. Since we are talking about durability, you should opt for something that offers a longer-duration warranty. If anything goes wrong, the manufacturer will replace or refund the amount. If you consider all these pointers, you will be able to buy a low profile motorcycle scissor jack. The durability, budget, and weight of the product play an important role. A wise thing to do would be to compare the products before purchasing one.

Easy to Use

You need to see if the low profile motorcycle scissor jack lets you have hassle-free usage. Select the one that allows you to have custom usage by choosing from multiple intensity levels. Apart from this, the low profile motorcycle scissor jack must come with a user-friendly.

Leave a Comment